Journal.

International Journal of Energy and Environment (IJEE)


Official Journal of the International Energy and Environment Foundation (IEEF)

 

The International Journal of Energy and Environment (IJEE) is a multi-disciplinary, peer-reviewed open access journal, covering all areas of energy and environment related fields that apply to the science and engineering communities. The journal enjoys the full support of the IEEF, who provide funds to cover all costs of publication, including the Article Processing Charges for all authors. Therefore the journal is both free to read and free to publish in for everyone. IJEE aims to promote rapid communication and dialogue among researchers, scientists, and engineers working in the areas of energy and environment. The journal provides a focus for activities concerning the development, assessment and management of energy and environment related programs. The emphasis is placed on original research, both analytical and experimental, which is of permanent interest to engineers and scientists, covering all aspects of energy and environment. It is hoped that this journal will prove to be an important factor in raising the standards of discussion, analyses, and evaluations relating to energy and environment programs. All manuscripts with significant research results in the areas of energy and environment and their application are welcome. The International Journal of Energy and Environment is published 6 times per year by the International Energy and Environment Foundation. There are no page charges and all articles are indexed by the major indexing media therefore providing the maximum exposure to the articles.
 
Find out more about the journal on the journal homepage;
http://www.IJEE.IEEFoundation.org
 

 

 

 

ISSN 2076-2895   (Print)
 ISSN 2076-2909 (Online)

 

 

 


   
 Book Series.  

CFD Applications in Energy and Environment Sectors: Volume 1.
Maher A.R. Sadiq Al-Baghdadi and Hashim R. Abdol Hamid, Editors

 

Chapter  1: Simulation and Modelling of Oxygen Coal Combustion with Flue Gas Recirculation.

Chaouki Ghenai

Chapter  2: The Choice of the Best Air Distribution Concept in Air-Conditioned Auditorium by Means of CFD Numerical Prediction.

Barbara Lipska, Piotr Koper

Chapter  3: CFD Applications in Natural Ventilation of Buildings and Air Quality Dispersion.

N. Nikolopoulos, A. Nikolopoulos, I. Papadakis, K.-S. P. Nikas

Chapter  4: CFD Modeling of Air Pollutant Transport and Dispersion.

Labovský Juraj, Jelemenský Ľudovít

Chapter  5: CFD Modeling of Multiphase Flow in Environmental Engineering.

Masroor Mohajerani, Mehrab Mehrvar, Farhad Ein-Mozaffari

Chapter  6: CFD Study on the Roles of Trees on Airflow and Pollutant Dispersion within Urban Street Canyons.

Salim Mohamed Salim, Andrew Chan, Riccardo Buccolieri, Silvana Di Sabatino

Chapter  7: Energy Efficiency and Air Quality in Hospitals Design.

Essam E. Khalil

Chapter  8: Application of CFD in Pulverized Fuel Combustion.

M. Tayyeb Javed, Tahira Sultana

Chapter  9: A Heat Transfer Model For Fluids Based on Cellular Automaton Application to an Air Conditioning of A Building.

Andrés Saiz Martínez

Chapter 10: CFD Application in Power Plants.

Essam E. Khalil

Chapter 11: Analysis and Computation of the Heat Charge/Discharge Behavior in Packed Bed Thermal Storage Systems.

Pei-Wen Li, Jon Van Lew, Wafaa Karaki, Cho Lik Chan, Jake Stephens

ISBN 13: 978-1-46623-065-1
Pages: 364 - Published: 2011

   

   
 Book Series.  

Engineering Applications of Computational Fluid Dynamics: Volume 1.
Maher A.R. Sadiq Al-Baghdadi, Editor

 

Chapter  1: Filtered Density Function as a Modern CFD Tool.

N. Ansari, F.A. Jaberi, M.R.H. Sheikhi, P. Givi

Chapter  2: CFD Applications in Steam Boilers.

N. Nikolopoulos, A. Nikolopoulos, E. Karambinis, M. Agraniotis, P. Grammelis, E. Kakaras

Chapter  3: CFD Simulation on Human-Environment System.

Shengwei Zhu

Chapter  4: CFD Applications in Membrane Technology by Finite Element Analysis.

José M. Gozálvez-Zafrilla, Asunción Santafé-Moros

Chapter  5: CFD Modelling of Stirred Tanks.

Z. Driss, M. Ammar, W. Chtourou, M.S. Abid

Chapter  6: CFD Modeling and Simulations: Horizontal Deep Drilling Process and Filter Cake Formation.

Mohd A. Kabir, Isaac K. Gamwo

Chapter  7: CFD Simulation of Phase Particle Entrapment.

Peymani F. Y., Ganbari S. A., Liu Y., Hayatdavoudi A.

Chapter  8: Simulation of Low-Btu Syngas Combustion in Trapped Vortex Combustor.

Khaled Zbeeb, Chaouki Ghenai

Chapter  9: Experimental, Analytical and Numerical Investigation of a Swirling Submerged Jet Flow.

H. Alighanbari, M. R. Amiralaei, S. Savtchenko

Chapter 10: CFD Simulations of Two-Phase Flow.

Yu Zhang

Chapter 11: CFD Simulation of Syntrophic Anaerobic Digestion of Volatile Fatty Acids in a Continuous Stirred Reactor.

T. Amani, S.M. Mousavi, M. Nosrati

ISBN 13: 978-1-46623-106-1
Pages: 448 - Published: 2011

   

   
 Book.  

CFD Modeling in Development of Renewable Energy Applications.
Maher A.R. Sadiq Al-Baghdadi, Editor

 

Chapter  1: A Multi-fluid Model to Simulate Heat and Mass Transfer in a PEM Fuel Cell.

Torsten Berning, Madeleine Odgaard, Sřren K. Kćr

Chapter  2: CFD Modeling of a Planar Solid Oxide Fuel Cell (SOFC) for Clean Power Generation.

Meng Ni

Chapter  3: Hydrodynamics and Hydropower in the New Paradigm for a Sustainable Engineering.

Helena M. Ramos, Petra A. López-Jiménez

Chapter  4: Opportunities for CFD in Ejector Solar Cooling.

M. Dennis

Chapter  5: Three Dimensional Modelling of Flow Field Around a Horizontal Axis Wind Turbine (HAWT).

Chaouki Ghenai, Armen Sargsyan, Isam Janajreh

Chapter  6: Scaling Rules for Hydrodynamics and Heat Transfer in Jetting Fluidized-Bed Biomass Gasifiers.

K. Zhang, J. Chang, P. Pei, H. Chen, Y. Yang

Chapter  7: Investigation of Low Reynolds Number Unsteady Flow around Airfoils in Pitching, Plunging and Flapping Motions.

M.R. Amiralaei, H. Alighanbari, S.M. Hashemi

Chapter  8: Justification of Computational Fluid Dynamics Simulation for Flat Plate Solar Energy Collector.

Mohamed Selmi, Mohammed J. Al-Khawaja, Abdulhamid Marafia

Chapter  9: Comparative Performance of a 3-Bladed Airfoil Chord H-Darrieus & a 3-Bladed Straight Chord H-Darrieus Turbines using CFD.

R. Gupta, Agnimitra Biswas

Chapter 10: Computational Fluid Dynamics for PEM Fuel Cell Modelling.

A. Iranzo, F. Rosa

Chapter 11: Analysis of the Performance of PEM Fuel Cells: Tutorial of Major Functional and Constructive Characteristics using CFD Analysis.

P.J. Costa Branco, J.A. Dente

Chapter 12: Application of Techniques of Computational Fluid Dynamics in the Design of Bipolar Plates for PEM Fuel Cells.

A.P. Manso, F.F. Marzo, J. Barranco, M. Garmendia Mujika

ISBN 13: 978-1-46623-131-3
Pages: 414 - Published: 2011

   

   
 Book Series.  

Engineering Applications of Computational Fluid Dynamics: Volume 2.
Maher A.R. Sadiq Al-Baghdadi, Editor

 

Chapter  1: CFD Modeling of Methane Reforming in Compact Reformers.

Meng Ni

Chapter  2: FEM Based Solution of Thermo Fluid Dynamic Phenomena in Solid Oxide Fuel Cells (SOFCS).

F. Arpino, A. Carotenuto, N. Massarotti, A. Mauro

Chapter  3: Computational Fluid Dynamics in the Development of a 3D Simulator for Testing Pollution  Monitoring Robotic Fishes.

John Oyekan, Bowen Lu, Huosheng Hu

Chapter  4: CFD Applications in Electronic Packaging.

C.Y. Khor, Chun-Sean Lau, M.Z. Abdullah

Chapter  5: CFD Simulation of Savonius Wind Turbine Operation.

Joăo Vicente Akwa, Adriane Prisco Petry

Chapter  6: Intermittency Modelling of Transitional Boundary Layer Flows on Steam and Gas Turbine Blades.

Erik Dick, Slawomir Kubacki, Koen Lodefier, Witold Elsner

Chapter  7: Numerical Analysis of the Flow through Fitting in Air Conditioning Systems.

N.C. Uzárraga-Rodriguez, A. Gallegos-Muńoz, J.M. Belman-Flores, J.C. Rubio-Arana

Chapter  8: Design and Optimization of Food Processing Equipments using Computational Fluid Dynamics Modeling.

N. Chhanwal and C. Anandharamakrishnan

Chapter  9: Fuel and Intake Systems Optimization of a Converted LPG Engine:

Steady and Unsteady in-Cylinder Flow CFD Investigations and Experiments Validation.

M. A. Jemni, G. Kantchev, Z. Driss, M. S. Abid

Chapter 10: Computational Fluid Dynamics Application for Thermal Management in Underground Mines.

Agus P. Sasmito, Jundika C. Kurnia, Guan Mengzhao, Erik Birgersson, Arun S. Mujumdar

Chapter 11: Computational Fluid Dynamics and its Applications.

R.Parthiban, C.Muthuraj, A.Rajakumar

ISBN 13: 978-1-47832-935-0
Pages: 382 - Published: 2012

   

   
 Book.  

PEM Fuel Cells - Fundamentals, Modeling and Applications.
Maher A.R. Sadiq Al-Baghdadi, Author

 

Part I: Fundamentals

Chapter  1: Introduction.

Chapter  2: PEM fuel cell thermodynamics, electrochemistry, and performance.

Chapter  3: PEM fuel cell components.

Chapter  4: PEM fuel cell failure modes.

Part II: Modeling and Simulation

Chapter  5: PEM fuel cell models based on semi-empirical simulation.

Chapter  6: PEM fuel cell models based on computational fluid dynamics.

Part III: Applications

Chapter  7: PEM fuel cell system design and applications.

ISBN 13: 978-1-48197-823-1
Pages: 280 - Published: 2013

   

   
 Book.  

Alternative Fuels Research Progress.
Maher A.R. Sadiq Al-Baghdadi, Editor

 

Chapter  1: Pollutant Emissions and Combustion Characteristics of Biofuels and Biofuel/Diesel Blends in Laminar and Turbulent Gas Jet Flames.

R. N. Parthasarathy, S. R. Gollahalli

Chapter  2: Sustainable Routes for The Production of Oxygenated High-Energy Density Biofuels from Lignocellulosic Biomass.

Juan A. Melero, Jose Iglesias, Gabriel Morales, Marta Paniagua

Chapter  3: Optical Investigations of Alternative-Fuel Combustion in an HSDI Diesel Engine.

T. Huelser, M. Jakob, G. Gruenefeld, P. Adomeit, S. Pischinger

Chapter  4: An Insight into Biodiesel Physico-Chemical Properties and Exhaust Emissions Based on Statistical Elaboration of Experimental Data.

Evangelos G. Giakoumis

Chapter  5: Biodiesel: A Promising Alternative Energy Resource.

A.E. Atabani

Chapter  6: Alternative Fuels for Internal Combustion Engines: An Overview of the Current Research.

Ahmed A. Taha, Tarek M. Abdel-Salam, Madhu Vellakal

Chapter  7: Investigating the Hydrogen-Natural Gas Blends as a Fuel in Internal Combustion Engine.

Ilker YILMAZ

Chapter  8: Conversion of Bus Diesel Engine into LPG Gaseous Engine; Method and Experiments Validation.

M. A. Jemni , G. Kantchev , Z. Driss , R. Saaidia , M. S. Abid

Chapter  9: Predicting the Combustion Performance of Different Vegetable Oils-Derived Biodiesel Fuels.

Qing Shu, ChangLin Yu

Chapter 10: Production of Gasoline, Naphtha, Kerosene, Diesel, and Fuel Oil Range Fuels from Polypropylene and

Polystyrene Waste Plastics Mixture by Two-Stage Catalytic Degradation using ZnO.

Moinuddin Sarker, Mohammad Mamunor Rashid

ISBN 13: 978-1-48405-771-1
Pages: 442 - Published: 2013

   

   
 Book.  

Computational Fluid Dynamics Applications in Green Design.
Maher A.R. Sadiq Al-Baghdadi, Editor

 

Chapter  1: Computational Fluid Dynamics Applications in Green Building Design.

Zhiqiang (John) Zhai

Chapter  2: CFD Investigation of the Ventilation and Thermal Performance of a Wind Tower Design Integrated with Heat Transfer Devices.

John Kaiser Calautit, Ben Richard Hughes, Hassam Nasarullah Chaudhry, Saud Abdul Ghani

Chapter  3: Computational Fluid Dynamics in Concentrating Solar Technologies.

M.I. Roldan, L. Valenzuela, J. Fernandez-Reche

Chapter  4: Numerical Simulation in One Room with an Energy Conservation Air Conditioner.

Di Liu, Fu-Yun Zhao

Chapter  5: Modified Rayleigh Method for Calculating the Natural Frequency of Stepped Cantilever Beam.

Luay S. Alansari

Chapter  6: CFD Computation of a Small Incurved Savonius Wind Rotor.

Zied Driss, Olfa Mlayeh, Makram Maaloul, Mohamed Salah Abid

Chapter  7: Study on Buffeting Performance of a Long-Span Cable-Supported Bridge Based on Numerical Simulation and Field Measurement.

Hao Wang, Tong Guo, Tianyou Tao, Aiqun Li

Chapter  8: CFD-Based Analysis and Optimization of Gas Cyclones Performance.

Khairy Elsayed, Chris Lacor

Chapter  9: CFD Modelling of Floor Heating System in Dome Shape Rooms According to the Thermal Comfort Condition.

T. Khademinejad, S. Rahimzadeh, P. Talebizadeh, H. Rahimzadeh, H. Sarkardeh

Chapter 10: Computational Fluid Dynamics Modelling in Environmental Friendly Energy Systems.

Adéla Macháčková, Radim Kocich, Peter Horbaj

Chapter 11: CFD Modeling and Analysis of Inlet and Exhaust Gaseous Flow System. Case of an Alternative Fueling IVECO Engine.

M. A. Jemni, G. Kantchev, M. S. Abid

Chapter 12: Application of CFD and HAM Models in Green Building Design: A Review.

Piaia J.C.Z., Cheriaf M., Rocha J.C.

Chapter 13: Computational Fluid Dynamics Study for Hydrolysis of Urea.

J. N. Sahu, B.C. Meikap, Anand V. Patwardhan

ISBN 13: 978-1-49487-575-6
Pages: 402 - Published: 2014

   

   
 Book.  

Stress Redistribution in Composite Materials.
Luay S. Alansari, Author

 

Part I: Introduction
1.1. General
1.2. Classifications of Composite Materials
1.3. Elastic Properties of Fiber Composite Materials
1.4. Failure in Fiber Composite Materials
1.5. The Load Sharing Theory
1.6. Micromechanical Model of the Fractures of Composite Materials
 

Part II: Theoretical Analysis
2.1. Introduction
2.2. The Micromechanical Shear Lag Model
2.3. Modifying of Influence Superposition Technique
2.4. Finite Element Analysis
2.5. Cases Studying
 

Part III: Results
3.1. Introduction
3.2. Single Fiber Break Case
3.3. Single Matrix Break Case
3.4. Multi-Breaks Cases
3.5. Misalignment Case
3.6. Shear Stress Results
 
Appendix
 
References

ISBN 13: 978-1-49730-742-1
Pages: 132 - Published: 2014

   

   
 Book.  

PEM Fuel Cells - from Single Cell to Stack

Fundamentals, Modeling, Analysis, and Applications
Maher A.R. Sadiq Al-Baghdadi, Author

 

Part I: Fundamentals

Chapter  1: Introduction.

Chapter  2: PEM fuel cell thermodynamics, electrochemistry, and performance.

Chapter  3: PEM fuel cell components.

Chapter  4: PEM fuel cell failure modes.

Part II: Modeling and Simulation

Chapter  5: PEM fuel cell models based on semi-empirical simulation.

Chapter  6: PEM fuel cell models based on computational fluid dynamics (CFD).

Part III: Analysis

Chapter  7: PEM fuel cell analysis.

Chapter  8: PEM fuel cell stack design, assembly, and analysis.

Part IV: Applications

Chapter  9: PEM fuel cell system design and applications.

 

ISBN 13: 978-1-50588-564-4
Pages: 382 - Published: 2015

   

   
 Book.  

Dynamic Analysis Investigation of Stiffened and Un-Stiffened Composite Laminated Plate Subjected to Transient Loading
Muhannad Al-Waily, Author

 

Chapter  1: Introduction.

 

Chapter  2: Mechanical Properties of Composite Laminated.

 

Chapter  3: Dynamic Analysis Investigation of Composite Plate with Different Laminated Theories.

 

Chapter  4: Modal Analysis.

 

Chapter  5: Numerical Investigation.

 

Chapter  6: Case Study.

ISBN 13: 978-1-50757-536-9
Pages: 342 - Published: 2015

   

   
 Book.  

Analytical and Numerical Buckling and Vibration Investigation of Isotropic and Orthotropic Hyper Composite Materials Structures
Muhannad Al-Waily, Author

 

Chapter  1: Introduction.

 

Chapter  2: Analytical and Numerical Investigation.

 

Chapter  3: Vibration Plate and Beam Case Study.

 

Chapter  4: Buckling Plate Case Study.

ISBN 13: 978-1-50588-564-4
Pages: 244 - Published: 2015

   

   
 Book Series.  

Engineering Applications of Computational Fluid Dynamics: Volume 3.
Maher A.R. Sadiq Al-Baghdadi, Editor

 

Chapter  1: CFD Analysis of Wood Biomass Combustion and Flue Gas Waste Heat Usage in Modern Energetic Devices.

Marian Bojko, LumírHružík, Adam Bureček, RadimKocich, AdélaMacháčková, LenkaKunčická

 

Chapter  2: CFD Modelling in Solar Thermal Engineering.

M.I. Roldán, J. Fernández-Reche, L. Valenzuela, A. Vidal, E. Zarza

 

Chapter  3: Numerical Analysis Investigation Study of Deflection and Stresses with Size and Number Holes Effect of Different Composite Laminated Plate Structures Types.

Muhannad Al-Waily

 

Chapter  4: Theoretical Study of A Cold Air Distribution System with Different Supply Patterns

Hyder Mohammed Abdul Hussein

 

Chapter  5: Computer Simulation of the Turbulent Flow Inside a Heat Exchanger for Different Inclined Angles of the Diffusers.

SobhiFrikha, ZiedDriss, Mohamed AymenHagui

 

Chapter  6: Numerical and Experimental Investigation of Multi points Die Forming.

Abdul Kareem JalilKadhim, Ragad Aziz Neama

ISBN 13: 978-1-51178-878-6
Pages: 292 - Published: 2015

   

   
 Book Series.  

Engineering Applications of Computational Fluid Dynamics: Volume 4.
Maher A.R. Sadiq Al-Baghdadi, Editor

 

Chapter  1: Theoretical and Numerical Investigation of Vibration and Buckling Analysis Beam with Crack Depth, Location and Orientation Effect.

Muhannad Al-Waily

 

Chapter  2: Numerical Simulation of Air Distribution System with Different Supply Patterns.

Hyder Mohammed Abdul Hussein

 

Chapter  3: Reynolds-Averaged Navier-Stokes Modelling of Air Pollution at the Local Urban Scale.

Desmond Adai, Martin Jaeger

 

Chapter  4: Computational Thermo-Fluid Dynamics of Turbulent Free Surface Flow using Level Set Method.

Ashraf Balabel

 

Chapter  5: CFD Computation of the Aerodynamic Structure of Arched Roof Obstacles with Different Heights.

Slah Driss, Zied Driss, Imen Kallel Kammoun

 

Chapter  6: CFD Computation of a Water Savonius Rotor.

Ibrahim Mabrouki, Zied Driss, Mohamed Salah Abid

 

Chapter  7: CFD Investigations of LPG Engine Mixture Device - Case of Hydrogen Enriched Fuelled Engine.

M. A. Jemni, S. HadjKassem, M. S. Abid

 

ISBN 13: 978-1-51197-480-6
Pages: 252 - Published: 2015

   

   
 Book.  

Applications of Computational Fluid Dynamics and Finite Element Methods in Engineering Education

Maher A.R. Sadiq Al-Baghdadi, Author

 

 

Chapter  1: Introduction.

Chapter  2: Three-Dimensional Computational Fluid Dynamics Model for Analysis and Design of PEM Fuel Cells.

Chapter  3: CFD Analysis of the Clamping Pressure Distribution in Running PEM Fuel Cell.

Chapter  4: CFD Study of Power Transistor Heat Sinks Using Different Patterns of Micro Pin Fins for Heat Transfer Enhancement.

Chapter  5: Natural Vibration Analysis and Mode Shapes of a PEM Fuel Cell Stack.

Chapter  6: CFD Study of a Power Transistor Heat Sink for Better Cooling.

Chapter  7: CFD Modeling of Dust Transport and Dispersion through an Office.

ISBN 13: 978-1-51212-242-8
Pages: 238 - Published: 2015

   

   
 Book Series.  

Engineering Applications of Computational Fluid Dynamics: Volume 5.
Maher A.R. Sadiq Al-Baghdadi, Editor

 

Chapter  1: Modeling of Attached and Detached Turbulent Viscous Fluid Flow over Symmetrical Aerofoil.

Sahib Shihab Ahmed

 

Chapter  2: Enhancement of Heat Transfer Agent for a Flat-Plate Solar Collector by using Nanofluids.

Sura Q. Kadhim, Mohammed Hussein K. Abbas

 

Chapter  3: Experimental and Numerical Investigation to Evaluate the Performance of Triangular Finned Tube Heat Exchanger.

Vinous M. Hameed, Bashar MuslemEssa

 

Chapter  4: Experimental and Numerical Investigation of Shell and Helical Coil Tube Heat Exchanger.

Vinous M. Hameed, Ahmed RaadBahlool

 

Chapter  5: Natural Convection Heat Transfer from Rectangular Fins with Different Configurations Including Interruption.

Zaid Hameed Hasan

 

ISBN 13: 978-1-54035-259-0
Pages: 346 - Published: 2016

   

   
 Book.  

Physical modeling of PIANO KEY weir: Detailed experimental study.

Full data set of more than 2800 experiments

Over 320 illustrations in color


Mohammed Baqer N. Al-Baghdadi, A
uthor

 

Chapter  1: Introduction.

Chapter  2: Discharge capacity of Piano Key weir.

Chapter  3: Physical modeling:  Derivation of governing relations.

Chapter  4: Laboratory work.

Chapter  5: Results and discussion: Laboratory observations.

Chapter  6: Analysis of results.

Chapter  7: Formulation of results.

Appendix A: Data Sets.

Appendix B: Photographs of PKW Models during Experiments.

Appendix C: Detailed Drawings of Experimental Models.

ISBN 13: 978-1-53971-134-6
Pages: 342 - Published: 2016

   

   
 Book.  

Analytical and Experimental Investigations Vibration Study of Isotropic and Orthotropic Composite Plate Structure with Various Crack Effect.

Muhannad Al-Waily, Author

 

Chapter  1: Introduction.

Chapter  2: Theoretical and Experimental Investigations Mechanical Properties of Composite Materials.

Chapter  3: Analytical and Experimental Investigations Vibration Study of Composite Plate Structure.

Chapter  4: Vibration Case Study.

Appendix

ISBN 13: 978-1-54403-151-4
Pages: 306 - Published: 2017

   

   
 Book.  

Materials Science and Engineering.

Noor Hussein, Author

 

Chapter  1: Introduction to Materials Science and Engineering.

Chapter  2: Atomic Structure and Interatomic Bonding.

Chapter  3: The Structure of Crystalline Solids.

Chapter  4: Imperfections in Solids.

Chapter  5: Mechanical Properties of Metals.

Chapter  6: Fracture Mechanics, Fatigue, and Creep Behavior.

Chapter  7: Phase Equilibrium Diagrams.

Chapter  8: The Iron–Carbon System.

Chapter  9: Metal Alloys.

Appendix: Physical Properties of Some Elements.

ISBN 13: 978-1-54408-380-3
Pages: 212 - Published: 2017

   

   
 Book.  

PEM Fuel Cell Engines

Principles, Design, Modelling, and Analysis
Maher A.R. Sadiq Al-Baghdadi, Author

Part I: Principles

Chapter  1: Introduction.

Chapter  2: PEM fuel cell thermodynamics, electrochemistry, and performance.

Chapter  3: PEM fuel cell components.

Chapter  4: PEM fuel cell failure modes.

Part II: Design

Chapter  5: PEM fuel cell engines design.

Part III: Modelling and Simulation

Chapter  6: PEM fuel cell models based on semi-empirical simulation.

Chapter  7: PEM fuel cell models based on computational fluid dynamics.

Chapter  8: PEM fuel cell stack models based on solid mechanics-computational fluid dynamics.

Chapter  9: Steam reformer unit models based on computational fluid dynamics.

Part IV: Analysis

Chapter  10: PEM fuel cell analysis.

Chapter  11: PEM fuel cell stack analysis.

ISBN 13: 978-1-98347-499-6
Pages: 478 - Published: 2018

   

   
 Book Series.  

Progress in River Engineering & Hydraulic Structures: Volume 1.
Mohammed Baqer N. Al-Baghdadi, Editor

 

Chapter  1: Optimum Safe Hydraulic Design of Stepped Spillway.

Ishraq M. R. A. Al-Shareefi, Abdul-Hassan K. Al-Shukur, Safaa K. Hashim Al-Khalaf

 

Chapter  2: Investigation of Local Scour Around Curved Groynes.

Huda Hadi Al-Yassiry, Hayder A. K. Al-Thamiry, Hasan Mahdi M. Al-Khateeb

 

Chapter  3: Investigating the Setting of the Entrance of Vertical Suction Pipes in Storm Water Pump Station.

Ali Hussein Athab, Hasan Mahdi M. Al-Khateeb, Hayder A. K. Al-Thamiry

 

Chapter  4: Experimental Investigation to Determine the Discharge Coefficient of Piano Key Weir.

Zainab Ahmed El-Katib, Saleh I. Khassaf, Laith J. Aziz

 

Chapter  5: Manning Roughness Coefficient of Ferrocement Canals Strengthened Using Carbon Fiber Reinforced Polymer.

Batool Adel Farhan, Hayder Talib Nimnim

 

ISBN 13: 978-1-98520-206-1
Pages: 556 - Published: 2018

   

   
 Book Series.  

Progress in River Engineering & Hydraulic Structures: Volume 2.
Mohammed Baqer N. Al-Baghdadi, Editor

 

Chapter  1: Analysis of local scouring processes downstream of a rigid bed of a hydraulic structure.

Donatella Termini

 

Chapter  2: Groundwater Recharge by Selection of Suitable Sites for Underground Dams using a GIS-based Fuzzy Approach in Semi-Arid Regions.

Hamidreza Koohbanani, Reza Barati, Mohammadreza Yazdani, Saeed Sakhdari, Reza Jomemanzari

 

Chapter  3: Reduce Spillways Cavitation Damages through Accurate Prediction of Bottom Air Concentration.

Masoud Arami-Fadafan, Mehdi Azhdary Moghaddam, Reza Barati

 

Chapter  4: Applications of Improved Moving Particle Semi-implicit Method for Numerical Simulation of Flow over Hydraulic Structures.

Masoud Arami-Fadafan, Masoud-Reza Hessami-Kermani, Reza Barati

 

Chapter  5: Assessment of Water Quality Index with Analysis of Physico-Chemical Parameters (Case study: The Shatt AlArab River-Iraq).

Ammar Salman Dawood, Ahmed Naseh Ahmed Hamdan, Ahmed Sagban Khudier

 

Chapter  6: Developing a Model to Predict Underwater Pipeline Scouring Depth using Gamma Test and ANFIS.

Naser Niknia, Azam Arabi Yazdi, Reza Barati

 

Chapter  7: River Flow Modeling by the Application of Remote Sensing and Fuzzy Regression.

Ahmad Ghandehary, Reza Barati

 

Chapter  8: Prediction of Longshore Sediment Transport Rate Using Soft Computing Techniques and Comparison with Semiempirical Formulas.

Tayeb Sadeghifar, Reza Barati

 

Chapter  9: Effect of Steel Reinforcement Corrosion on Reinforced Concrete in Hydraulic Structures Exposed to Marine Environment.

Sarah Haydar Hasan, Nada M. Fawzi Al-Galawi, Ali AbdulHussein Al-Tameemi

 

Chapter  10: Energy Dissipation by Using Different Sizes and Configurations of Direction Diverting Blocks on Spillways.

Tagreed Hameed Khlif, Riyadh Z. Al-Zubaidy, Kareem R. AlMurshidi

 

ISBN 13: 978-1-72759-365-5
Pages: 444 - Published: 2018

 

 

 

HOME RESEARCH CENTERS PUBLICATIONS EVENTS CONTACT US

 

Copyright © International Energy and Environment Foundation (IEEF).