|
|
The International
Energy and Environment Foundation (IEEF) organises a series
of annual conferences and exhibitions. IEEF also runs a series of
networking events. In addition IEEF hosts regular meetings and informal
workshops, as well as attending other conferences and exhibitions, a
number of which are supported by IEEF. |
|
|
1
Wind
Energy
2010 |
|
The use of the wind as an energy
source is increasing and growing worldwide. Wind energy is an
important non-fossil option to supplement fossil fuels for the
generation of electricity. Currently wind energy is the fastest
growing energy source in the world and in some regions wind
energy has a very significant impact on the power system. This
has led to interesting development of the technology in order to
integrate it economically in the power system.
The "Wind Energy 2010"
event unites wind industry leaders with economic development
groups, municipalities, and consumers eager to play a bigger
role in the use and expansion of wind energy and its economic
potential. This event was showed ways to play a bigger role in
the use and development of wind generated and used on-site and
that it is not just an alternative, but a realistic opportunity
to cut energy costs, cut carbon emissions, and make or save
money.
25 November 2010
Najaf - Iraq
|
|
2
Solar
Energy
2011 |
|
In today's climate of growing
energy needs and increasing environmental concern, alternatives
to the use of non-renewable and polluting fossil fuels have to
be investigated. One such alternative is solar energy.
Discovering the true facts about solar energy both globally and
in the region, is the objective of "Solar Energy 2011".
Iraq is considered the world's best spot for solar power and the
event is dedicated to be the informative hub for solar energy in
the region. Solar Energy 2011 will not be limited to government
and industrial application, however it will also focus on solar
application for domestic and small scale application.
Of all the energy sources available, solar has perhaps the most
promise. Numerically, it is capable of producing the raw power
required to satisfy the entire planet's energy needs.
Environmentally, it is one of the least destructive of all the
sources of energy. Practically, it can be adjusted to power
nearly everything. Clearly, solar energy is a resource of the
future.
21 February 2011
Najaf - Iraq
|
|
3
Environment
2011 |
|
All energy sources affect the
environment. There is no such thing as a completely “clean”
energy source. Getting the energy we need affects our
environment in many different ways. Some energy sources have a
greater impact than others. Fortunately, the energy industry has
become increasingly aware of the importance of environmental
protection and is working to reduce its long-term impact.
To combat global warming and the other problems associated with
fossil fuels, Iraq must switch to renewable energy sources like
sunlight, wind, hydro power, and biomass. All renewable energy
technologies are not appropriate to all applications or
locations, however. As with conventional energy production,
there are environmental issues to be considered.
The impact of energy on the environment is determined by how
much energy is used and what form of energy we choose. The
objective of "Environment 2011" is to identifies
some of the key environmental impacts associated with fossil
fuels and also associated with renewable technologies, and
suggests appropriate responses to them.
26 June 2011
Najaf - Iraq
|
|
4
CFD
2012
Industrial Applications |
|
The use of Computational Fluid
Dynamics (CFD) to simulate and predict fluid flows, heat transfer and
associated phenomena continues to grow throughout many
engineering disciplines. On the back of ever more powerful
computers and graphical user interfaces CFD provides engineers
with a reliable tool to assist in the design of industrial
equipment often reducing or eliminating the need for performing
trial-and-error experimentation. Moreover, flow modelling
provides insights into our fluid flow problems that would be too
costly or simply prohibitive by experimental techniques alone.
The added insight and understanding gained from flow modelling
gives us confidence in our design proposals, avoiding the added
costs of over-sizing and over-specification, while reducing
risk. This allows us to investigate more design options and
"what if" scenarios than ever before. The "CFD 2012:
Industrial Applications"
aims to bring together academic scientists, leading engineers,
industry researchers and scholar students to exchange and share
their experiences and research results about the industrial
applications of Computational Fluid Dynamics (CFD), and discuss
the practical challenges encountered and the solutions adopted.
11 February 2012 Najaf - Iraq
|
|
5
Green
Architecture
2012 |
|
Green architecture, or green
design, is an approach to building that minimizes harmful
effects on human health and the environment. The "green"
architect or designer attempts to safeguard air, water, and
earth by choosing eco-friendly building materials and
construction practices. Green Architecture 2012 will cover topics related
to the best practices required to bridge the gap between design
and service, challenges in operation and maintenance,
measurement and verification, etc. Low energy architecture,
high-performance buildings, building management systems, energy
efficient lighting design, passive cooling systems and water
management systems will be discussed at the conference, which is
dedicated to architects, consultants, engineers and
professionals working in the building industry.
15 April 2012 Najaf - Iraq
|
|
6
Green Building & Sustainable Development 2012 |
|
Green building refers to a
structure and using process that is environmentally responsible
and resource-efficient throughout a building's life-cycle: from
siting to design, construction, operation, maintenance,
renovation, and demolition. This requires close cooperation of
the design team, the architects, the engineers, and the client
at all project stages. The green buildings are designed to
reduce the overall impact of the built environment on human
health and the natural environment by: Efficiently using energy,
water, and other resources; Protecting occupant health and
improving employee productivity; Reducing waste, pollution and
environmental degradation.
Sustainable development is a pattern of growth in which resource
use aims to meet human needs while preserving the environment so
that these needs can be met not only in the present, but also
for generations to come. Green Building and
Sustainable Development 2012 will bring together leading
sustainability professionals, academic scientists, leading
engineers, and stakeholders to discuss, debate and share best
practice on design, construction and the built environment.
Attendance will provide you with the very latest information on
the business and practical case for building and developing in a
sustainable manner. Green Building and Sustainable Development 2012
provides exceptional building science and technology knowledge
on the principles and trends of green building. You'll learn
about these practices from well-known general session speakers,
be able to interact with industry experts and your peers during
education sessions. You'll get contacts, resources and ideas
that are good for your organization, your customers and your
bottom line.
|
|
7
NAJAF my Identity 2012 |
|
The International Symposium of
Najaf my Identity 2012 call for recovers and employ
the Najafi-Iraqi architectural theme into all buildings in whole Najaf city in general and in downtown in particular.
Najafi-Iraqi architectural theme was developed during more than 7000
years by the sequenced Iraqi civilizations. This unique theme is
considered to be one of the main figures of the Njafi identity
in particular and Iraqi identity in general.
Accordingly, the recovering and using of this theme means
tenacity in Najafi-Iraqi identity, where the spirit of
continuity with the Iraqi civilization heritage being dispread
and rooted.
The call to recovering the Iraqi-Najafic theme has a scientific
root and practical advantages, where the using of local
materials of construction is considered as a harmonization with
the environment of the city as well as the benefits of using
these materials in insulation and prevention the buildings from
the extremist weather and temperature scale.
The symposium of Najaf my Identity 2012 is a
serious attempt aiming to call all Najafic people to take this
responsibility on their shoulder and working together for Najaf
harmony with its highbred historical heritage.
22 September 2012 Najaf - Iraq
|
|
8
Energy
and Environment
Criteria in Building Design 2013 |
|
It is exciting to see the many
changes that have taken place in the construction industry and
the architectural/engineering professions over the last decade
in the promotion of environmentally responsible buildings.
Sustainable buildings use valuable resources such as energy,
water, materials, and land more efficiently than buildings that
are simply built to code. These green buildings are also kinder
to the environment, and provide indoor spaces that are generally
more healthy, comfortable, and productive. The main benefits of
building green include: Reducing energy consumption, Protection
of ecosystems, and Improved occupant health. Thousands of
projects have been built over the last decade, providing
tangible evidence of what green building can accomplish in terms
of improved comfort levels, aesthetics, and energy and resource
efficiency. National and local programs encouraging green
building are flourishing throughout the nation as well as
globally. Energy and Environment Criteria in Building Design 2013
will bring together leading sustainability
professionals, architects, designers, academic scientists, and
leading engineers to discuss, debate and share best practice on
design, construction and the built environment. Attendance will
provide you with the very latest information on the business and
practical case for building and developing in a sustainable
manner. Energy and Environment Criteria in Building Design
2013 provides exceptional building science and
technology knowledge on the principles and trends of green
building.
26 January 2013 Najaf - Iraq
|
|
9
CFD
2013 Building and Urban Design |
|
Design of buildings has to follow
rules and regulations particularly when it comes to human
comfort. Locations and dimensions of buildings relative to each
other have an important effect on the wind flow and its effect
on the surrounding areas. Building ventilation can affect
building performance in many ways. Efficient ventilation and
airflow improves occupant comfort and safety, enhances worker
productivity, increases equipment performance and longevity, and
reduces building maintenance and operating costs. One of the
major environmental concerns is the air pollution. Indoor and
outdoor air pollution are a main problem faced by designers and
engineers when designing ventilation inlets and outlets of a
building. CFD is used to calculate air movement, temperatures,
smoke migration, and chemical or particulate migration in any
indoor or outdoor environment. By using CFD early in the design
cycle, the design team may optimize the ventilation systems in
their buildings providing both a healthy environment for the
inhabitants and potential energy savings due to mechanical
system improvements.
The "CFD 2013: Building and Urban Design" aims to
bring together academic scientists, leading engineers,
researchers and scholar students to exchange and share their
experiences and research results about the roles of CFD in
building design, demonstrating its typical application in
designing a thermally-conformable, healthy and energy-efficient
building.
2 February 2013 Najaf - Iraq
|
|
10
Kids' Environment 2013 |
|
Everything we do has an impact on
the world around us-from the clothes we wear and food we eat to
the gardens we grow and the trash we throw away. And to take the
best care of the earth-and ourselves-it's important to make
smart choices. Kids' Environment 2013 environmental education
program for youth who care about the planet. It offers
interactive, fun, educational games and activities that utilize
participants’ willingness to learn. Children are encouraged to
form their own opinions, make decisions, get involved and
understand the impact their own actions have on the environment.
Kids' Environment 2013 promotes a greater
understanding and respect for animals, plants, water, soil, air
and energy systems. Helps children comprehend the positive and
negative environmental effects of our actions, to get kids
excited about protecting the environment.
Clomid is used for treating female infertility.
Clomid 100mg $117.8 - $0.98 Per pill Clomid 100mg $93.12 - $1.03 Per pill Clomid 25mg $101.94 - $0.57 Per pill Clomid 50mg $141.03 - $0.78 Per pill Clomid 50mg $57.75 - $0.96 Per pill
- Gotha
- Vaihingen an der Enz
- Markkleeberg
- Felsberg
- Pasewalk
Where to buy genuine clomid for pregnancy-related side effects?
If you're considering buying clomid in Canada to help with your pregnancy, ask around and check the manufacturer's website for a company that guarantees the product is safe and effective for pregnancy.
Note of Caution:
Please exercise caution when using ANY medications during pregnancy. Always ask advice of your health care provider regarding how to use specific products.
What are the long term risks of clomid?
The use of clomid for fertility control is one form of natural birth control. The drug is not without side effects, and effects can range from minor discomfort to serious problems which may require hospitalization or surgical operation. Clomid is commonly prescribed for three reasons:
Premature aging: Clomid has no effect on preventing pregnancy during the full 12-14 weeks of pregnancy. This fact means that drug does not prevent pregnancy until or unless you are unable to conceive or begin a pregnancy without assistance as result. It is recommended if you are planning to have a baby soon after having surgery to use another method of birth control.
Premature aging: Clomid has no effect on preventing pregnancy during the full 12-14 weeks of pregnancy. This fact means that drug does not prevent pregnancy until or unless you are unable to conceive or begin a pregnancy without assistance as result. It is recommended if you are planning to have a baby soon after having surgery to use another method of birth control. Reduced risk infertility: Clomid does not affect the level of male hormones in the body, making it unlikely that the drug could inhibit fertility hormones. If you would prefer to stop receiving fertility treatment and you are over 35 years of age, you can take the drug for life after your partner is no longer using it.
Clomid does not affect the level of male hormones in the body, making it where to get clomid in australia unlikely that the drug could inhibit fertility hormones. If you would prefer to stop receiving fertility treatment and you are over 35 years of age, you can take the drug for life after your partner is no longer using it. Reduced chance of ovarian cancer: Because clomid is a progesterone-only drug, the risk of getting endometrial cancer (the most generic pharmacy price common type of ovarian cancer) is minimized.
A study published in August 2011 found that even when women stopped taking clomid for a month or so, they were not any more likely to get cancer later.
Another study published in 2003 showed that the drug did not increase risk of miscarriage. This also means if you were planning to become pregnant naturally, don't stop taking it.
Should I take clomid for my whole pregnancy?
It Clomid 50mg $78.57 - $0.87 Per pill is not recommended that you take this medication for as long you would take tamoxifen. should it as prescribed.
What are the usual side effects associated with clomid?
Clomid side effects can be severe to nearly impossible avoid with proper use. Clomid can cause:
• Abdominal pain and nausea
• Cramping
• Weight gain
• Breast tenderness and heavy menstrual flow
• Dark urine, green or urine which could mean bacteria is in your urine
• Abnormally low blood sugar
• Decreased fertility
• Increased need to urinate. If you already have a urinary tract infection or retention, take with a meal.
Also, consult your doctor for the risks of this drug in the pregnant woman as well.
A woman over 35 who stops using clomid should have a follow-up consultation from her doctor to determine if the side effects are reversible or have the potential for permanent complications.
Where can I find more information about the use of clomid and pregnancy?
Clomid is an important drug for women who are using condoms consistently for the prevention of sexually transmitted infections like chlamydia or gonorrhea. In fact, using condoms properly is the primary control method that makes certain women eligible for this drug.
When used properly by women with sexually active partners, clomid can be an effective method of birth control.
There are clinics in Canada that offer this drug to prevent pregnancy. Click here learn about ways to access them.
For women who are at a high risk of having an ectopic pregnancy, including those who are over 35, there is a drug called Daclatasone which also has anti-proliferative activity.
You can read more about this particular drug here:
• Clomid in the clinic and
How is clomid taken?
Clomid is not a pill. It single drug that needs to be taken with a meal. If you don't take it by mouth, you will need to be able swallow without any difficulty or cramping. Take the drug by mouth without.
- clomid where to buy
- where to buy a clomid
- where to buy real clomid
- where to get clomid in australia
- where to get nolvadex clomid
- where can i get clomid online
- clomid where to buy it
- clomid where to buy uk
- Clomid in Ann arbor
- Clomid in Madison
- Clomid in Salmon arm
- Clomid in Yonkers
- Clomid in Pennsylvania
Where to buy real clomid (not cheap imo) and some clomid to give if you can't be bothered with the pills (don't take more than 1 tablet if you're breastfeeding as your baby will be too tired to nurse).
I'd recommend avoiding the clomid-related side effects. These include drowsiness and diarrhoea, but not as bad with the oral tablets. If your body is used to the clomid where to buy provera and clomid and you do feel any nausea, this will pass within 5-8 hours. I'd recommend sticking with this Taking clomid online method for at least the first two weeks, and then switching to the oral tablets.
If you're worried about the generic pharmacy viagra cost, not alone. There was a lot of criticism on the forums and Facebook group, I got quite a few e-mails from people who were unsure if they should try clomid or inject. I was also contacted by a parent who had been using clomid and decided they didn't want their child to be on the contraceptive pill or injectable method for a long time. She said was very pleased with her choice, as it's been easier to deal with the side effects.
What I'm saying is, if you've got to have it, at least it on the birth control method first and then have a look at the clomid option if you're really not sure. I say at least, because I'm not sure it's worth the effort and expense of switching!
- Clomid buy online cheap uk
- Where can i get clomid pills
- Where can i get clomid online
Uhingen | Clomid Ortrand | Clomid Neustadt am Rübenberge |
Clomid Elkhorn | Cloudcroft | San Luis |
Clomid Lugau | Wülfrath | Lorch |
drugstore coupon code retailmenot drugstore coupon 15 where to buy clomid and nolva uk free shipping for drugstore coupon where to buy genuine clomid drugstore coupon green natural where to buy a clomid drugstore coupon link
Where can i get clomid online ?
"No one can supply an online store for clomid since there is no such thing on the market."
"I have had no success finding anything to provide clomid except over the counter. I've even heard of a few places that try to sell it for under $100. I'm currently wondering what you're going to do if there is a shortage some generic place where clomid can be bought."
"Can I get Clomid Online"
"If Clomid is not an option in your country then you may be able to get some form of Clomid in other countries the world."
I was trying to find out what Clomid would cost to order online. I was looking at different international sites, and I don't see what kind of order I should place. Is there a way to get cost estimate, from where I am?
"We offer online orders in the US at competitive rates."
We have a Clomid delivery charge of $14.95, which is charged at the time you place your order. Please see what our customer service representative has to say about the charge for this service.
When do I need to order a prescription for Clomid?
"Clomid is a drug that to be purchased at one time. When you plan to use Clomid regularly, you should make sure you're getting the maximum dosage. We'll usually advise you not to use Clomid while pregnant, if you've recently been or you experience a rash fever, or if you've had any liver disease. However, you shouldn't stop taking it until you've used up this maximum allowance. Remember, too, that you will still need to make sure you consume the Clomid each day. You can continue to take it at the usual dose, or you can reduce the daily dose according to doctor's supervision. You might find it best to take every day Clomid 100mg $93.12 - $1.03 Per pill or two to get the maximum dose into your system before you need to use the medication in a high amount to get maximum effect."
"We usually have to call your insurance company for prescription. If there is no insurance policy that covers Clomid, we can either write a check for that specific drug at the pharmacy, or you will need to have your insurance written for you that will cover Clomid."
My insurance doesn't cover anything for Clomid, what should I do to get it covered?
"We're happy to help you figure out what to do about your insurance, but we can't do it for you. We're a licensed provider of drugs, and it's our job to find the best medication fit your needs. We just have our own business, and job is to put the medication in your mouth."
If I have the flu it may help Clomid work.
"We do not know if Clomid helps during the flu. However, there does seem to be some indication that it may help reduce the duration of flu season."
I got an allergic reaction to Clomid. I was taking it for a week prior to that. Was it the Clomid or medication?
"Your reaction to Clomid is probably due the medication you took. Most children get better when their doses are reduced."
I've been taking Clomid for a while and it hasn't worked for me anymore. What should I do?
"You can stop taking Clomid, but you can only do it for 2 weeks. It's not possible to give Clomid children whose blood pressure has dropped too low for them to take it normally."
I have been using Clomid for a few months but I have had one side effect not related to Clom.
Where To Buy Oral Clomid - Buy Here
97-100 stars based on
661 reviews
|
|
11
|
|
Computational Fluid Dynamics (CFD)
is computer-based simulation of predicting what will happen when
fluids (gases & liquids) flow. CFD complements experimental and
analytical approaches by providing an alternative cost-effective
mean of simulating real-life flow problems. CFD has now become a
leading research, educational, and design tool. It is being used
to better understand physical events and processes and perform
numerical experiments. Most importantly, it has now become a
design tool by providing capabilities to facilitate design
optimization, reduce design bottlenecks and improve engineering
performance, enhance communications, and answer what-if
questions. CFD is now routinely used to solve complex flow
problems in vast number of industrial applications.
The aim of the course
"Introduction to CFD" is to provide an introduction to
the theory and application of computational techniques for
predicting fluid flow and heat and mass transfer in engineering
applications, industrial plant, and equipment. Lectures are
given on the main elements of the methodology underlying the
majority of CFD computer codes, including the governing
differential equations and numerical methods for solving them.
The lectures are complemented by tutorials. The lectures are
followed by a coursework project in which the users will gain
experience in the use of commercial CFD software package to
explore a range of flow problems.
5-10
April 2013 Najaf - Iraq
|
|
12
NAJAF my Identity 2013 |
|
The continuation of the conference
Najaf My Identity 2012 and in order to achieve all the goals
that called for, the organizer of the conference, the
International Energy and Environment Foundation (IEEF)
establishes Najaf My Identity 2013. Conference
Najaf My Identity 2013 comes in order to formulate a
management list to keep the heritage and urban identity of the
holy city of Najaf, which includes a set of standards that would
save the urban patterns in the old city and highlight its
distinctive civilization. This management list has been
formulated based on international charters on urban heritage and
religious cities, which have been prepared by the International
Council on Monuments and Sites (ICOMOS) and United Nations
Educational, Science and Cultural Organization (UNESCO). The preservation of the
identity of Najaf is done through three basic themes: Keep all
the heritage places of the city of Najaf, with its sense of the
patterns of urban and distinctive heritage, and maintain it from
erosion and extinction, and in accordance with the international
standards; The development of standards and regulations that
govern the process of designing buildings to be built in the old
city of Najaf and in line with the features and patterns
inherent architectural and heritage of the city; and Preserving
the traditional renewable energy systems and sustainability
principles in the heritage buildings of the old city of Najaf,
and collect, disseminate and promote research in the area of
energy conservation and sustainable development in those
buildings.
In order to succeed all these efforts, the organizer of the
conference was keen to invite all stakeholders in this regard;
Iraqi and international experts, academics, decision-makers in
the government and local executive bodies associated with them,
community figures, and activists citizens of the city. We hope
that this management list will be model regulations in order to
preserve the identity of all Iraqi cities.
26 October 2013 Najaf - Iraq
|
|
|